TurboFlow® Low Flow Turbine Sensor
Quick Specs...
Overview / Design Principle:
Gems FT-210 features proven turbine technology in a small package for low flow applications. The turbine technology provides a highly repeatable sensor ideally suited for measurement of either volume dispensing and/or flow rate applications. The small turbine reacts quickly to on/off dispensing applications. Each sensor is 100% tested, ensuring years of service life. Units are available in Grivory for use in methanol/ethanol.
Wetted Materials
- Body: Nylon 12 (Grillamid TR55); Grivory - Turbine: Nylon 12 Composite - Bearings: PTFE/15% Graphite
Operating Pressure
350 PSI (24 bar)
Burst Pressure
1400 PSI (97 bar)
Flow Range
.026-.65 gallons/minute 0.1-2.5 liters/minute 3.4-84.5 ounces/minute
Pulses
83,000 per gallon 22,000 per liter 650 per ounce
Frequency Output
36.6-917 Hz
Operating Temperature
-4°F to 212°F (-20°C to 100°C)
Viscosity
32 to 70 SSU (.8 to 16 Centistokes)
Filter
<50 Microns
Input Power
5 to 24 VDC
Output (Hz)
NPN Sinking Open Collector @ 20 mA Maximum
Leakage Current 10µA (3K-30K Pull up resistor required)
Accuracy
±3% of Reading
Repeatability
0.5% of Full Scale
Electrical Connection
9.4mm Spacing 3-pole DIN Connector (1" high)
Inlet/Outlet Ports
1/4" NPT (1/4" G Male also available)
Dimensions: