Supply voltage range |
10...30 VDC |
Reverse polarity protection |
Yes |
Consumption w/o load |
≤50 mA (24 VDC) |
Initializing time |
50 ms after power on |
Interfaces |
Parallel (cams)
5 programmable special outputs |
Number of cams |
250 |
Steps per turn |
4096 / 12 bit |
Number of turns |
4096 / 12 bit |
Absolute accuracy |
±0.03° |
Code |
Binary |
Code sequence |
CW/CCW coded by connection |
Inputs |
TxD, RxD (RS232)
Control signals UP/DOWN and zero
ENABLE |
Output levels |
PNP or NPN open collector |
Interference immunity |
DIN EN 61000-6-2 |
Emitted interference |
DIN EN 61000-6-4 |
Programming interface |
RS232 |
Programmable parameters |
Steps per turn
Number of turns
2 presets (limits)
Rotation speed control |
Diagnostic functions |
Code continuity check
Signal frequency exceeded |
Approval |
UL Approval / E63076 |
Housing |
ø75 mm |
Shaft |
ø14 mm hollow shaft |
Protection DIN EN 60529 |
IP 54 |
Operating speed |
≤6000 rpm |
Rotor moment of inertia |
20 gcm² |
Materials |
Housing: steel
Flange: aluminium |
Operating temperature |
-25...+70 °C |
Relative humidity |
95 % non-condensing |
Resistance |
DIN EN 60068-2-6 Vibration 10 g, 16-2000 Hz
DIN EN 60068-2-27 Shock 200 g, 6 ms |
Weight approx. |
700 g |
E-connection |
D-SUB connector, 37-pins with 1 m cable |