Supply voltage |
24/110 VAC ±10 % (50/60 Hz)
230 VAC +6/-10 % (50/60 Hz)
24 VDC ±10 % |
Ripple residue |
<48 % |
Nominal frequency |
50 / 60 Hz |
Impulse ratio |
1:1 |
Service life |
100 million impulses |
Preset |
1 preset |
Output contact |
Change-over contact by micro-switch, one-pole |
Switching capacity |
100 VA / 30 W |
Limit switch service life |
1 million switching cycles |
Spark extinguisher |
Recommended for inductive load |
Standard
DIN EN 61010‑1 |
Protection class II
Overvoltage category II
Pollution degree 2 |
Emitted interference |
DIN EN 61000-6-4 |
Interference immunity |
DIN EN 61000-6-2 |
Approval |
CE conform |
Display |
White numbers on black |
Number of digits |
5-digits |
Digit height |
4.5 mm (count)
3.5 mm (preset) |
Count mode |
1 impulse = 1 count |
Step-by-step switching |
Adding in 2 half steps |
Measuring range |
99 999 |
Reset |
Manual by reset button |
Operating temperature |
0...+60 °C |
Storing temperature |
-20...+70 °C |
Relative humidity |
80 % non-condensing |
Protection DIN EN 60529 |
IP 41 |
Housing type |
Built-in housing |
E-connection |
Soldering pins (flat) |
Mounting |
Front panel with 2 screws |
Dimensions W x H x L |
60 x 75 x 61 mm |
Cutout dimensions |
51 x 51 mm |
Installation depth |
77.5 mm |
Weight approx. |
150 g |
Material |
Housing: Noryl PPO, black |