Managed Ethernet 8-CH Thermocouple Input Module
JetI/O 6510 is a Block I/O module equipped with one Ethernet port and 8 channels Analog Input connectors. JetI/O 6510 provides 16 bit resolution and high accuracy for I/O data collecting. The analog input range can support from 150mV to 10V and 20mA. The values are most adopted in the industrial environment.
JetI/O 6510 provides Windows Utilities, SNMP and Web for configuration. Industrial Modbus/TCP protocol and OPC Server driver for integrating JetI/O with existed HMI/SCADA. Robust aluminum case is with good heat dispersing and IP31 protection. With JetI/O users can easily perform status monitoring and control the remote I/O devices.
Dimensions (Unit -mm)
16 bits/100MHZ, RISC-Based
32K bytes
512K bytes
256 bytes
1.0 sec H/W
PWR: Power Input plugged and On (Green)
IEEE 802 .3 10Base-T
1* RJ-45, Auto MDI/MDI-X
Built-in 1.5 KV magnetic isolation protection
Upper (LAN Activity): Orange On & Blinking
IP, TCP, UDP, SNMP, HTTP, BOOTP, DHCP, Modbus/TCP, OPC Server
8 Differential
16 bits
Thermocouple (T/C), mV, V, mA
±2.5V, ±1V, ±500mV, ±100mV, ±50mV, ±15mV, ±20mA
K/J/N/C/E/B/T/R/S T/C
Yes
±0.01% of FSR ±1LSB
10 samples/sec (total)
10 M (ohm)
On Board EEPROM
2500Vrms
external unregulated +24V (18-32V)
Max. 3.2W
120 (H) x 55 (W) x 75 (D) mm
Din-Rail
Aluminum
CE, FCC Class A
-25 ~ 70°C
20 ~ 90% non-condensing
-40 ~ 80°C
3 years
Windows Utility, Web browser, SNMP, DHCP Client, TFTP Server for firmware update
Block I/O Utility, Device Fider Utility
OPC Server for Modbus/TCP
MIB-II: System, SNMP Trap and Private MIB
Up to 4 SNMP Trap Server
High-/Low- Voltage/ Current alarms
C++ Example code by optional
JetI/O 6511: Industrial Managed Ethernet 8-CH Thermocouple Input module. Includes: Quick Installation Guide / DIN Rail Mount kit / Documentation and Software / CD-ROM