| Specifications |
|
Input
|
|
Pressure Range
|
Vacuum to 400 bar (6000 psi) 0 -25 bar Absolute
|
|
Proof Pressure
|
2 x Full Scale (FS) (1.5 x FS for 400 bar, >= 5000)
|
|
Burst Pressure
|
>35 x FS <= 6 bar (100 psi)
>20 x FS >= 60 bar (1000 psi)
>5 x FS <= 400 bar (6000 psi)
|
| Fatigue Life |
Designed for more than 100 million FS cycles
|
|
Performance
|
|
Long Term Drift
|
0.2% FS/year (non-cumulative)
|
|
Accuracy
|
0.25% FS typical (optional 0.15% FS)
|
|
Thermal Error
|
1.5% FS typical (optional 1% FS)
|
|
Compensated Temperatures
|
-20°F to 80°F (-5°C to 180°C)
|
|
Operating Temperatures
|
-40°C to 125°C (-22°F to 260°F) for elec. codes A, B, C, 1
-20°C to 80°C (-5°F to 180°F) for elec. codes 2, D, G, 3
-20°C to 50°C (-5°F to 125°F) for elec. codes F, M, P
|
|
Zero Tolerance
|
1% span
|
|
Span Tolerance
|
1% span
|
|
Response Time
|
0.5 ms
|
|
Mechanical Configuration
|
|
Pressure Port
|
See ordering chart
|
|
Wetted Parts
|
17-4 PH Stainless Steel
|
|
Electrical Connection
|
See ordering chart
|
|
Enclosure
|
316 SS, 17-4 PH ss
IP65 for elec. codes A, B, C, D, G, 1, 2, 3
IP67 for elec. code F
IP68 for elec. code M
IP30 for elec. code "3" with flying leads
|
|
Vibration
|
70g, peak to peak sinusoidal, 5 to 2000 Hz
(Random Vibration: 20 to 200 Hz @ =20g Peak per MIL-STD.-810E Method 514.4)
|
|
Acceleration
|
100g steady acceleration in any direction 0.032% FS/g for 1 bar (15 psi) range decreasing logarithmically to 0.0007% FS/g for 400 bar (6000 psi) range
|
|
Shock
|
20g, 11 ms, per MIL-STD.810E
Method 516.4 Procedure I
|
|
Approvals
|
CE, ETL Intrinsically Safe for Class 1, Div. 1, Groups C & D (also available as BASEEFA ATEX intrinsically safe - contact factory for part numbers)
|
|
Weight
|
Approx. 100 grams (additional; cable 75 g/m)
|
|
Millivolt Output
|
|
Output
|
100 mV (10 mv/v)
|
|
Supply Voltage (Vs)
|
10 Vdc (15 Vdc max.) Regulated
|
|
Bridge Resistance
|
2600-6000 Ohms
|
|
Voltage Output Units
|
|
Output
|
See ordering chart
|
|
Supply Voltage (Vs)
|
1.5 Vdc above span to 35 Vdc @ 6 mA
|
|
Supply Voltage Sensitivity
|
0.01% FS/Volt
|
|
Min. Load Resistance Current Consumption
|
(FS output / 2) K Ohms
Approx. 6 mA at 7.5V output
|
|
Current Output Units
|
|
Output
|
4-20 mA (2 wire)
|
|
Supply Voltage (Vs)
|
24 Vdc, (7-35 Vdc) Above 100°C supply limited to 24 Vdc
|
|
Supply Voltage Sensitivity
|
0.01% FS/Volt
|
|
Max. Loop Resistance
|
(Vs-7) x 50 ohms
|