Gems Sensors SureSite Level Indicators
High Performance Versions - Standard Size
Quick Specs...
- Designed to meet the requirements of ASME B31.1/B31.3
- Application Condition (max.) 2600 PSI @ 750° F, 4200 PSI @ 100° F
- Liquid Specific Gravities to (0.55)
- Pressures to 4200 PSI (290 bar)
Overview / Design Principle:
Certified for demanding applications, these SureSite® Indicators feature ANSI flanges and fittings and construction to rigorous ASME standards. You can’t specify a better visual level indicator. ASME designs available upon request.
Mounting Configuration Types:
To choose the best configuration for your application, focus on the process connections (connections where the liquid typically enters/leaves the SureSite).
Type AA
|
Type BA
|
Type CA
|
Type DA
|
|
|
|
|
Top and Bottom
Process Connections
|
Side and Side
Process Connections
|
Top and Side
Process Connections
|
Side and Bottom
Process Connections
|
|
Type AA
|
Type BA
|
Type CA
|
Type DA
|
Typical Lengths*
|
C to C = L + 10 - 1/4" (260.4mm)
|
C to C = L
|
C to C = L + 3 - 3/4" (95.2mm)
|
C to C = L + 6 - 1/2" (165.1mm)
|
Flag Material
|
Plastic (300°F/148.9°C) or Aluminum (750°F/399°C)
|
Length of Indication (Uninterrupted)
|
240"(610 cm)
|
Minimum Specific Gravity
|
0.39
|
*L = Length of Visual Indication - Dimensions vary due to connections, material and specific gravity. Note: Additional materials, floats, connections and manufacturing techniques are available to extend lengths and operational capabilities. Please contact Gems Sensors & Controls if the parameters above do not meet your requirements.
Material:
Select desired material from those tabulated below. Mark the Code Number on your Check List. The pressure/temperature performance parameters are specified in the chart at right. Consult the factory with pressure/temperature requirements that fall outside the parameters shown here. These units are manufactured in Schedule 40, 80 or 160 pipe accordingly.
Materials
|
Code
|
Housing
|
Float
|
316L Stainless Steel
|
316L Stainless Steel
|
2
|
316L Stainless Steel
|
Titanium (Ti-6AI-4V)
|
9
|
Note: Additional materials, floats, connections and manufacturing techniques are available to extend lengths and operational capabilities. Please contact Gems Sensors if the parameters above do not meet your requirements. |
Note: SureSite Indicators are available for temperatures as low as -200F (-129C)
Connection Code Descriptions
Please provide all connections when completing the Product Check List in the link above.
Note: Before selecting your connections, consider incorporating your vent and drain requirements.
T & B (Top and Bottom)
T/B 15. ANSI welded pipe cap
T/B 16. ANSI fixed slip-on flange/blind mating flange
T/B 17. ANSI welded pipe cap with FNPT
T/B 19. ANSI welded pipe cap with MNPT nipple
T/B 20. ANSI fixed slip-on flange/mating FNPT reducing flange
T/B 22. ANSI fixed slip-on flange/mating flange w/MNPT nipple
T/B 23. ANSI welded pipe cap with ANSI flange
T/B 24. ANSI fixed slip-on flange/mating reducing ANSI flange spool
T/B 25 ANSI welded pipe cap with socketweld coupling
T/B 26. ANSI welded pipe cap with buttweld nipple
T/B 27. ANSI fixed slip-on flange/mating flange with socketweld coupling
T/B 28. ANSI fixed slip-on flange/mating flange with buttweld nipple
T/B 29. ANSI fixed weldneck flange/blind mating flange
T/B 30. ANSI fixed weldneck flange/mating FNPT reducing flange
T/B 32. ANSI fixed weldneck flange/mating flange w/MNPT nipple
T/B 33. ANSI fixed weldneck flange/mating reducing flange spool
T/B 34. ANSI fixed weldneck flange/mating flange with socketweld coupling
T/B 35. ANSI fixed weldneck flange/mating flange with buttweld nipple
Sa & Sb (Sides)
S1. No connection
S2. MNPT nipple
S3. FNPT coupling
S4. ANSI flange
S5. Weldneck flange
S6. Socketweld coupling
S7. Buttweld nipple