Gems Sensors SureSite Level Indicators
Engineered Plastics Versions - Standard Size
Quick Specs...
- Temperatures to 280°F (139°C)
- Pressures to 150 PSI (10.3 Bar)
- Up to 20 feet (6.1 meters) of continuous visual indication
Overview / Design Principle:
The 2” Schedule 40 pipe design is ideal for use on chemical storage tanks, or with almost any liquid where temperature and pressure requirements are moderate. All SureSite Indicators feature the same patented flag and guide assemblies used on our alloy versions, so you can be assured of excellent visibility and long-life reliability.
Accessory Options: Transmitters, Indicating Scales and Switch Modules
Mounting Configuration Types:
To choose the best configuration for your application, focus on the process connections (connections where the liquid typically enters/leaves the SureSite).
Type AP
|
Type BP
|
Type CP
|
Type DP
|
|
|
|
|
Top and Bottom
Process Connections
|
Side and Side
Process Connections
|
Top and Side
Process Connections
|
Side and Bottom
Process Connections
|
|
Type AP
|
Type BP
|
Type CP
|
Type DP
|
Typical Lengths*
|
C to C = Overall Length
|
C to C = L + 8" (203mm)
|
C to C = L + 8" (203 mm)
|
C to C = L + 8"(203 mm)
|
Overall Length
= C to C + 11" (279mm)
|
Overall Length
= C to C + 5 - 1/2" (140mm)
|
Overall Length
= C to C + 5 - 1/2" (140mm)
|
Flag Indicator Material
|
Plastic
|
Length of Indication, Max.)
|
240"(610 cm)
|
*L = Length of Visual Indication - Dimensions vary due to connections, material and specific gravity. Note: Additional materials, floats, connections and manufacturing techniques are available to extend lengths and operational capabilities. Please contact Gems Sensors & Controls if the parameters above do not meet your requirements.
Material:
Select desired material from those tabulated below. Mark the Code Number on your Check List. The pressure/temperature performance parameters are specified in the chart to the right. Consult the factory with pressure/temperature requirements that fall outside the parameters shown here.
Materials
|
Housing
|
Code
|
PVC
|
1
|
Clear PVC Housing/PVC Float
|
1A*
|
CPVC
|
2
|
PVDF
|
4
|
* 2" Schedule 40 pipe Pressure/Temperature Performance |
|
|
|
|
Connection Code Descriptions
Please provide all connections when completing the Product Check List in the link above.
Note: Before selecting your connections, consider incorporating your vent and drain requirements.
T & B (Top and Bottom)
T/B 1. Welded cap
T/B 2. Threaded cap (PVC/CPVC only)
T/B 3. Fixed flange/blind mating flange
T/B 4. Welded coupling/FNPT
T/B 5. Welded coupling/MNPT
T/B 6. Threaded union/MNPT
T/B 7. Fixed flange/mating flange MNPT
T/B 8. Threaded union/FNPT
T/B 9. Fixed flange/mating flange/FNPT
T/B 10. Welded coupling flange
T/B 11. Threaded union flange
T/B 12. Welded coupling/FNPT (PVC/CPVC only)
T/B 13. Welded coupling/FNPT w/MNPT nipple (PVC/CPVC only)
T/B 14. Threaded coupling/FNPT w/MNPT nipple (PVC/CPVC only)
T/B 15. Threaded coupling FNPT (PVC/CPVC only)
Sa & Sb (Sides)
S1– Blind–No Connection
S2– MNPT nipple
S3– FNPT coupling
S4– ANSI flange