Supply voltage |
115/230 VAC ±10 % (50/60 Hz)
24/48 VAC ±10 % (50/60 Hz)
24 VDC ±10 % |
Power consumption |
5 VA
4 W |
Sensor supply |
12...26 VDC / max. 85 mA |
Display |
LED, 7-segment display |
Number of digits |
6-digits |
Digit height |
14 mm |
Function |
Preset counter
Main counter with 2 presets
Totalizer
Hour counter |
Scaling factor |
0.0001...9999.99 |
Count modes |
Adding or subtracting
A-B (difference counting)
A+B total (parallel counting)
Up/Down
A 90° B phase evaluation |
Counting frequency |
3 Hz, 25 Hz, 10 kHz programmable |
Operating modes |
Step preset
Main preset
Parallel alignment
Trailing preset |
Data memory |
>10 years in EEPROM |
Reset |
Button, electric or automatic |
Outputs relay |
Normally open or closed, programmable |
Output holding time |
0.01...99.99 s |
Interfaces |
RS422
RS485 |
Standard
DIN EN 61010‑1 |
Protection class II
Overvoltage category II
Pollution degree 2 |
Emitted interference |
DIN EN 61000-6-3 |
Interference immunity |
DIN EN 61000-6-2 |
Programmable
parameters |
Operating modes
Sensor logic
Scaling factor
Count mode
Control inputs |
Approvals |
UL/cUL
CE conform |
Operating temperature |
0...+50 °C |
Storing temperature |
-20...+70 °C |
Relative humidity |
80 % non-condensing |
E-connection |
Plug-in screw terminals |
Core cross-section |
1.5 mm² |
Protection DIN EN 60529 |
IP 65 face with seal |
Operation / keypad |
Membrane with softkeys |
Housing type |
Built-in housing |
Dimensions W x H x L |
96 x 48 x 114.7 mm |
Installation depth |
115 mm |
Mounting |
Clip frame |
Cutout dimensions |
92 x 45 mm (+0.6) |
Materials |
Housing: Makrolon 6485 (PC)
Keypad: Polyester |
Weight approx. |
350 g (AC)
250 g (DC) |