| Supply voltage |
24/110 VAC ±10 % (50/60 Hz)
230 VAC +6/-10 % (50/60 Hz)
24 VDC ±10 % |
| Ripple residue |
<48 % |
| Nominal frequency |
50 / 60 Hz |
| Impulse ratio |
1:1 |
| Service life |
100 million impulses |
| Preset |
1 preset |
| Output contact |
Change-over contact by micro-switch, one-pole |
| Switching capacity |
100 VA / 30 W |
| Limit switch service life |
1 million switching cycles |
| Spark extinguisher |
Recommended for inductive load |
| Precontact |
Permanent precontact as permanent contact (please indicate desired value when ordering) |
Standard
DIN EN 61010‑1 |
Protection class II
Overvoltage category II
Pollution degree 2 |
| Emitted interference |
DIN EN 61000-6-4 |
| Interference immunity |
DIN EN 61000-6-2 |
| Approval |
CE conform |
| Display |
White numbers on black |
| Number of digits |
5-digits |
| Digit height |
4.5 mm |
| Count mode |
1 impulse = 1 count |
| Step-by-step switching |
Subtracting in 2 half steps |
| Measuring range |
99 999 |
| Reset |
Manual by reset button |
| Operating temperature |
0...+60 °C |
| Storing temperature |
-20...+70 °C |
| Relative humidity |
80 % non-condensing |
| Protection DIN EN 60529 |
IP 41 |
| Housing type |
Built-in housing |
| E-connection |
Soldering pins (flat) |
| Mounting |
Front panel with spring clips |
| Dimensions W x H x L |
53.2 x 53.2 x 61 mm |
| Cutout dimensions |
51 x 51 mm |
| Installation depth |
77.5 mm |
| Weight approx. |
150 g |
| Material |
Housing: Noryl PPO, black |