Korenix Industrial 16+2G Gigabit Ethernet Switch

Korenix Industrial 16+2G Gigabit Ethernet Switch

Industrial 16+2G Gigabit Ethernet Switch 

• 16 10/100-TX and 2 Gigabit RJ-45/SFP combo ports (10/100/1000 Base-TX, 1000Base-X)
• 12.8G Non-Blocking Switching Performance, high backplane single chip solution
• Supports up to 9,216 bytes Jumbo Frame Packet for secured large file transmission
• 2 Relay Outputs for Gigabit port Link Failure Detection
• IEEE 802.1p Quality of Service (QoS) compliance
• Auto Gigabit RJ-45/SFP module detection
• IP31 rugged aluminum case
• Dual 24V (12-48V) DC power inputs

JetNet 3018G, the 16+2G Industrial Gigabit Ethernet Switch, provides high port density for large-scale Ethernet network applications, while ensuring lower system costs by less unit installation.
With the non-blocking switching performance, JetNet 3018G provides 12.8G on-chip backplane which ensures faster local transmission latency and efficient upstream transmission without data loss and blocking.
For large scale surveillance networks or for applications, which require large size traffic transmission, JetNet 3018G supports up to 9K Jumbo frame allowing to bypass larger file packets with fewer segments to the uplink networks.
With dual on board gigabit SFP uplink ports, the switch can flexibly develop high-density copper or fiber network connections with other high-end switches.
Just like the JetNet models, JetNet 3018G also supports 2 Digital Outputs to indicate fault conditions when a gigabit port link failure happens as a result increasing the system reliability.
JetNet 3018G is designed as a rugged surface in aluminum material housing with efficient heat dispersion capability and -25~70oC wide operating temperature to provide high-performance and reliable data transmission under severe industrial conditions.

High Bandwidth and Performance The JetNet3018G equipped with 16 100M Fast Ethernet plus 2 Gigabit Ethernet ports, totally requests at least 7.2G backplane for wire-speed and bi-directional transmission. To meet the requests, there are 2 types of system architecture - nonblocking and blocking. In non-blocking architecture, the switch fabric should provide higher backplane than are the front ports’ requests. No matter it’s a one to one or fully mesh network, the throughput is always 100% without any loss. The blocking architecture is usually implemented in non single chipset solution. Limited backplane may cause traffic jam when there is a heavy loading transmission among the ports. The JetNet 3018G embedded 12.8G backplane is much higher than the system requires. All the traffic can be switching without blocking and loss. Up to 9K Jumbo frame allows transmitting larger files with less segments. The high bandwidth and performance solution guarantees the high capabilities of the product.

Up to 9KBytes Jumbo Frame Bypass

Jumbo Frame Packet Bypass

To run Jumbo Frame within the industrial environment, all the switches in the network must support Jumbo Frame feature. Once there is any Jumbo Frame unaware switch within the network, the Jumbo Frame will be dropped. Korenix provides complete Jumbo Frame supported switches for allowing users to easily build a Jumbo Frame network. The JetNet 3018G acts as an entry level Jumbo frame switch to bypass up to 9K Jumbo Frame packet from the PC to the uplink network of higher level backbone switches.

JetNet 3018G Appearance

Dimensions (Unit -mm)

JetNet 3018G Industrial 16+2G Gigabit Ethernet Switch
Includes:

• JetNet 3018G (without SFP transceivers)
• Din Rail Kit
• Document CD
• Quick Installation Guide
• Console Cable

 
Optional Accessories

• SFPGSX: 1000Base-SX multi-mode transceiver 550m, -10~70°C
• SFPGSX-w: 1000Base-SX multi-mode transceiver 550m, -40~85°C
• SFPGSX2: 1000Base-SX multi-mode transceiver 2km, -10~70°C
• SFPGSX2-w: 1000Base-SX multi-mode transceiver 2km, -40~85°C
• SFPGLX10: 1000Base-LX single-mode transceiver 10km, -10~70°C
• SFPGLX10-w: 1000Base-LX single-mode transceiver 10km, -40~85°C
• SFPGLHX30: 1000Base-LHX single-mode transceiver 30km, -10~70°C
• SFPGLHX30-w: 1000Base-LHX single-mode transceiver 30km, -40~85°C
• SFPGXD50: 1000Base-XD single-mode SFP transceiver, 50km, -10~70°C
• SFPGXD50-w: 1000Base-XD single-mode SFP transceiver, 50km, -40~85°C
• SFPGZX70: 1000Base-ZX single-mode SFP transceiver, 70km, -10~70°C
• SFPGZX70-w: 1000Base-ZX single-mode SFP transceiver, 70km, -40~85°C