Gems Sensors Series With 5 amp relay Level Switch
O-Ring Sealed, Water Resistant J-Box
Quick Specs...
Overview / Design Principle:
An SPDT relay enables this level switch to control two independent loads up to 5 amps each, switching N.O. for one load and N.C. for the other. This unit is designed to operate with a load connected to each of the two outputs. These loads must be 10 watts, minimum, for correct SPDT switching. One load used alone must be connected to the N.O. terminal. With this load, which may be less than 10 watts, the unit will operate the same as an SPST unit.
Specifications |
Level Switch |
- Body and Float
|
Polypropylene
|
- Lead Wire Jacket
|
Thermoplastic Elastomer Zip Cord (TPE)
|
- Min. Liquid Sp. Gr.
|
0.55
|
- Operating Temperature
|
-40°F to +225°F (-40°C to 107.2°C)
|
- Operating Pressure (Max)
|
100 PSI @ 70°F
|
- Float Arc Envelope
|
1.50 inches (38.1 mm)
|
J-Box with 5A Relay
|
120 VAC, 50/60 Hz
Contacts: 5A, 240 VAC Res
1/3 H/P - 120 VAC
5A, 28 VDC Res
|
IMPORTANT REED SWITCH PROTECTION INFORMATION: Read before installing.