Embedded Linux Computer: 2 LAN, 2 Isolated Serial
JetBox 3350-i series is a compact embedded Linux computer with 2KV isolated serial ports for providing reliable connection and monitoring of access and security control devices in critical industrial environments. The compact-sized computers in addition integrate 2 Ethernet and 2 USB ports to provide more flexible connection configurations for versatile small front-end controller systems. Combined with IP-31 rugged enclosure, fan-less, anti-vibration/shock design and -40~80℃ wide operating temperature range, the JetBox 3350-i series ensure the reliability and high performance of front-end industrial controller applications under harsh industrial environments.
Embedded Linux Ready Korenix is devoted to the Linux computing and benefits customers by providing the JetBox series with embedded Linux ready system and easy-to-use interface. Compared to general purpose Linux system, embedded Linux is performance-optimized for front-end industrial control.
RISC-Based Computer with low power consumption The JetBox 3350-i is a RISC-based computer with lower power consumption and is stable and reliable. The JetBox 3350-i carries 2 LAN ports, 2 USB ports and 2 Serial ports to be the best solution in industrial control.
Isolated Serial Port The JetBox 3350-i provides 2KV isolation protection for two RS232/422/485 ports; therefore it is suitable to adapt to the critical industrial environments.
Dimensions (Unit = mm)
Hardware Specifications
Atmel ARM AT91RM9200 180 MHz
SDRAM 64MB
ROM 16MB
10/100 Based-Tx RJ-45 connector x2
microSD card slot x1
RS232/422/485 x2 (RJ45 connector) with 2KV isolation protection
USB 2.0 full speed x2 (Host) Supporting devices: USB flash, wireless dongle
LED per port (on the port): Link/Activity (Green on/Green blinking) Full Duplex/Collision (Yellow on/ Yellow blinking) LED per unit: Power on/off x1 (Green on/off) Ethernet Link/ Activity (Green on/ Green blinking) x2 Serial Tx only(Green),Rx only(Red),Both (Orange) x2 Reset button x1
Generates a time-out system reset, 1 sec.
DC 12~48V
7.2W
Embedded Linux 2.6.21
Rugged Aluminum Alloy Chassis, IP31 protection
Silver
Wall Mount
109(H) x 88(W) x 27(D) mm
0.5kg
-40 ~ 176°F(-40 ~ 80°C), 5 to 95% RH
FCC class A, CE EN55022 class A EN55024 EN61000-3-2, 3 EN61000-4-2, 3, 4, 5, 6, 8, 11 IEC 60950 Shock: IEC60068-2-27 (50g peak acceleration) Vibration: IEC60068-2-6 (5g/10~150Hz/operating) MTBF: greater than 200,000 hours@25°C
5 years
JetBox bootloader
ARP, PPP, CHAP, IPv4, PAP, ICMP, TCP, UDP, NFS
busybox (telnetd, inetd, udhcp, syslogd), diocfg, Irzsz, minicom, microcom, , ncurses, ser2net, setserial, bridge-utils, ethtool, goahead web server, iptables, net-snmp, ntp, openssh, openssl, pppd, ftpd, rppppoe, smtpclient, wireless-tools
Serial Interface Serial service modes: TCP server LAN Interface Ethernet: 10/100 Based-Tx RJ-45 connector x2, auto MDI/MDI-X
Security: HTTPS, SSH SNMP: MIB and traps NTP for time management
microSD card, USB, Watchdog timer, UART, Ethernet
JetBox 3350-iw Atmel 180MHz, 12~48V DC, 64MB SDRAM
All items include:
Optional Accessories:
Additional applications on micro-SD card: micro-SD card capacity is 1G mSD1G-LM mSD 1G, Modbus gateway for Linux