2 LAN, 4 Serial Linux Computer
Embedded Linux Ready Korenix is devoted to the Linux computing and benefits customers by providing the JetBox series with embedded Linux ready system and easy-to-use interface. Compared to general purpose Linux system, embedded Linux is performance-optimized for front-end industrial control.
Linux Auto-run The JetBox 5300 support Korenix Auto-Run customization setting on SD card. The advanced software feature allows users to configure their own Linux commands once the system is booted. Users only need to store the commands on an "Auto-Run" file and then store it on an SD card. This way they can automatically run specific configurations or run specific applications in the JetBox 5300 embedded computers making the industrial network management easier and more flexible.
RISC-Based Computer with low power consumption The JetBox5300 is a RISC-based computer with lower power consumption and is stable and reliable. The JetBox5300 carries 2 LAN ports, 2 USB ports, 2 RS232/422/485, 2 RS232, 4 digital inputs and 4 outputs to be the best solution in industrial control.
Dual power inputs The JetBox 5300 carries dual power inputs to make a power redundancy to reduce the impact of unstable power inputs.
Digital Input & Output Digital inputs and outputs are widely used in industrial applications such as indicators, alarms, reed switches, or sensors. The compact JetBox carries 4 digital output and 4 digital input channels and work as a front- end control agent.
Modbus Gateway (Optional) For Modbus control applications, Korenix also provides the optional Modbus Gateway function on the SD card. This value-added software enables serial Modbus RTU (or Modbus ASCII) devices to communicate with Modbus TCP devices. It is an open serial communication protocol based on master/ slave architecture and used to connect a supervisory computer with a remote terminal unit (RTU) in supervisory control and data acquisition (SCADA).
Dimensions (Unit = mm)
Hardware Specifications
Atmel AT91RM9200 180MHz
SDRAM 64MB
10/100 Based-Tx RJ-45 connector x2
SD card slot x1
RS-232 x2, RS-232/422/485 x2 (RJ45 connector)
USB 2.0 x2 (Host) Supporting devices: USB flash, wireless dongle
4 DI & 4 DO
LED per port: Link/Activity x2 (Green on/Green blinking) Full Duplex/ Collision x2 (Orange on/ Orange blinking) LED per unit: Power On/off x2 (Green on/off) SD card x1 (Green plug/unplug) Power on/off switch x1 Reset button x1
Generates a time-out system reset, 1 sec.
dual inputs, DC 12 ~ 24V
Single input 5.4W at 12V, 6.72W at 48V Dual inputs 5.28W at 12V, 7.2W at 48V
Embedded Linux 2.6.21
Rugged Aluminum Alloy Chassis, IP31 protection
Silver
DIN Rail
66(D) x 149 (H) x 120.5 (W) mm
800g
-40 ~ 176°F(-40 ~ 80°C)*, 5 to 95% RH
-40 ~ 176°F(-40 ~ 80°C), 5 to 95% RH
FCC class A, CE EN55022 class A EN55024 EN61000-3-2, 3 EN61000-4-2, 3, 4, 5, 6, 8, 11 Shock: IEC60068-2-27 (50g peak acceleration) Vibration: IEC60068-2-6 (5g/ 10~150Hz/operating) IEC61373 (Random/ 5~150Hz/ operating) MTBF: At least 200,000 hours @25°C
5 years
JetBox bootloader
ARP, PPP, CHAP, IPv4, PAP, ICMP, TCP, UDP, NFS
busybox (telnetd, inetd, udhcp), microcom, setserial, bridge-utils, ethtool, iptables, net-snmp, ntp, openssh, openssl, pppd, ftpd, rp-pppoe, smtpclient, syslogd, goahead web server
Serial Interface Serial service modes: TCP server LAN Interface Ethernet: 10/100 Based-Tx RJ-45 connector x2, auto MDI/MDI-X
Security: HTTPS, SSH SNMP: MIB and traps NTP for time management
SD card, USB, Watchdog timer, UART, Ethernet
JetBox 5300-w Atmel 180MHz, 12~48V DC, 64MB SDRAM, -40~80℃
All items include:
Optional Accessories: