Gems Sensors SureSite Level Indicators
Standard Alloy Versions - Standard Size
Quick Specs...
- Temperatures to 750°F (399°C)
- Pressures to 700 PSI (48 bar)
Overview / Design Principle:
Rugged, welded construction makes these 2-1/2” (63.5 mm) diameter design, alloy SureSite Indicators dependable over a long service life indoors and out.
Typical Applications:
- Pharmaceuticals
- Medical Equipment
- Food and Beverages
- Semiconductor Manufacturing
- Boilers
Mounting Configuration Types:
To choose the best configuration for your application, focus on the process connections (connections where the liquid typically enters/leaves the SureSite).
Type AA
|
Type BA
|
Type CA
|
Type DA
|
|
|
|
|
Top and Bottom
Process Connections
|
Side and Side
Process Connections
|
Top and Side
Process Connections
|
Side and Bottom
Process Connections
|
|
Type AA
|
Type BA
|
Type CA
|
Type DA
|
Typical Lengths*
|
C to C = L + 10 - 1/4"(260.4mm)
|
C to C = L
|
C to C
= L + 3 - 3/4" (95.2mm)
|
C to C
= L + 6 - 1/2" (165.1mm)
|
Flag Material
|
Plastic (300°F/148.9°C) or Aluminum (750°F/399°C)
|
Length of Indication (Uninterrupted)
|
240"(610 cm)
|
Minimum Specific Gravity
|
0.39
|
*L = Length of Visual Indication - Dimensions vary due to connections, material and specific gravity. Note: Additional materials, floats, connections and manufacturing techniques are available to extend lengths and operational capabilities. Please contact Gems Sensors & Controls if the parameters above do not meet your requirements.
Material:
Housing and Float: 316 Stainless Steel pressure/temperature performance parameters for alloy SureSite versions are specified in the chart at right. Please consult the factory with temperature/pressure requirements that fall outside the parameters shown here.
Materials
|
Housing
|
Float
|
Code |
316L Stainless Steel
|
316L Stainless Steel
|
2
|
Carpenter 20
|
Hastelloy C276
|
3*
|
Hastelloy C276
|
Hastelloy C276
|
4*
|
*Consult factory for pressure/temperature capabilities. |
|
= Stock Material (Best for economy and delivery) |
Note: SureSite Indicators are available for temperatures as low as -200F (-129C)
|
Connection Codes and Materials background-shaded in this color are stocked by Gems. Select these
connections where possible to obtain the most economical SureSite Indicators with a prompt 3-day delivery. |
Connection Code Descriptions
Please provide all connections when completing the Product Check List (above).
Note: Before selecting your connections, consider incorporating your vent and drain requirements.
T & B (Top and Bottom)
T/B 1. Welded pipe cap
T/B 2. Standard fixed flange/blind mating flange
T/B 3. Welded pipe cap w/FNPT
T/B 5. Welded pipe cap w/MNPT nipple
T/B 6. Standard fixed flange/mating FNPT reducing flange
T/B 8. Standard fixed flange/mating flange with MNPT nipple
T/B 9. Welded pipe cap with ANSI flange
T/B 10. Standard fixed flange/mating reducing flange spool
Sa & Sb (Sides)
S1. No connection
S2. MNPT nipple
S3. FNPT coupling
S4. ANSI flange
|
Top Mount Units
When it’s not practical to access the side of a tank for liquid monitoring, look to SureSite Top Mount Indicators for the solution. Please consult with the factory for these specially configured indicators 1-800-378-1600. |