Managed Ethernet 14-CH DI and 8-CH DO Module
JetI/O 6550 is a Block I/O module equipped with 14 channels Digital Input, 8 channels Digital Output connectors. JetI/O 6550 provides 16 bit resolution and high accuracy. It also supports event counter for DI mode, pulse output for DO mode. The flexible Conditions& Go (IF-Then) rules can help users to define intelligent logic rule for remote I/O control. JetI/O 6550 provides Windows Utilities, SNMP and Web for configuration. Industrial Modbus/TCP protocol and OPC Server driver for integrating JetI/O with existed HMI/SCADA. Robust aluminum case is with good heat dispersing and IP31 protection. With JetI/O users can easily perform status monitoring and control the remote I/O devices.
Dimensions (Unit -mm)
Specifications
16 bits/100MHZ, RISC-Based
32K bytes
512K bytes
256 bytes
1.0 sec H/W
PWR: Power Input plugged and On (Green)
IEEE 802 .3 10Base-T
1* RJ-45, Auto MDI/MDI-X
Built-in 1.5 KV magnetic isolation protection
Upper (LAN Activity): Orange On & Blinking
IP, TCP, UDP, SNMP, HTTP, Telnet, BOOTP, DHCP, Modbus/TCP, OPC Server
14 channels
source type
D/I or event counting with input frequency of 100 Hz max
30V max
4V
<2ms
8 channels
SSR output, sink type
Level or pulse output with programmable pulse width
5-40VDC
250mA max
Programmable
2500Vrms
external unregulated +24V (18-32V)
Max. 1.92W
120 (H) x 55 (W) x 75 (D)
Din-Rail
Aluminum
CE, FCC Class A
-25 ~ 70°C
20 ~ 90% non-condensing
-40 ~ 80°C
3 years
Windows Utility, Web browser, SNMP, DHCP Client, TFTP Server for firmware update
Block I/O Utility, Device Fider Utility
OPC Server for Modbus/TCP
MIB-II: System, SNMP Trap and Private MIB
Up to 4 SNMP Trap Server
Conditions of the DI/Counter values, Actions include DO/Pulse, Counter and Trap
C++ Example code by optional