Trycom USB to RS 232 RS 422 RS 485 Isolated Converter

Trycom USB to RS 232 RS 422 RS 485 Isolated Converter

 TRP-C08  USB to RS-232/422/485 Isolated Converter

    The TRP-C08 allows you to connect your serial devices to systems by using a USB interface. With auto configuration in data format, baud rate and RS-485 data flow direction control. TRP-C08 is able to automatically configure RS-232, RS-422 or RS-485 signals to baud rate without external switch setting. TRP-C08 is equipped with 3000V DC of isolation and internal surge-protection on each data lines to protect the host computer and converter against high voltage spikes, as well as ground potential difference. TRP-C08 also features a high-speed 256 Kb/s transmission rate, and supports various O.S. The industry DIN rail and panel mounting design enable user a fast and professional installation.

• Full compliance with the USB V1.0 and 2.0 specification.
• System gets 1 COM port when the converter is connected.
• Auto data format detecting.
• Auto direction flow control on RS-485.
• Auto baud rate switching from 75bps to 1228800bps.
• 256 byte buffer for upstream and downstream data flow.
• Direct power from USB port , no external power necessary.
• 3000V DC isolated protection.
• Surge protection on RS422/485 data lines.
• Power/TX/RX mode LED indicator. 
• DIN rail or panel mount support.
• Driver support: Windows 98/ME/2000/XP/CE3.0, and Linux, and Mac OS.

Specifications:

• USB interface: Fully compliant with V1.0, 2.0 specification.
• USB to serial bridge controller; Prolific PL2303HX.
• RS-232 signal: 5 full-duplex (TXD, RXD, CTS, RTS, GND).
• RS-422 signal: Differential 4 full-duplex wires (TX+, RX+, TX-, RX-).
• RS-485 signal: Differential 2 half-duplex wires (D+, D-).
• Data Format: Asynchronous data with all common combination of bits, parity, stop.
• Parity type: None, odd, even mark, space.
• Data bit: 5, 6, 7, 8 or 16.
• Stop bits: 1, 1.5, 2.
• Cable: USB type A to type B.
• Communication speed: 75~256KBbps.
• RS-422/485 line protection: Against surge, short circuit, and voltage peak.
• Transmission distance: RS-422/485 Up to 4000ft (1200M ).
• Connection type: Screw terminal accepts AWG #12~30 wires.
• Signal LED: Power on, TX, RX.
• Direct power from USB port.
• Power consumption: 1.2W.
• Isolation voltage: 3000V DC.
• Operating environment: -10 to 50℃ .
• Storage temperature: -20 to 70℃.
• Humidity: 10-90% Non-condensing.
• Dimension: 151mm X 75mm X 26mm .
• Weight: 375g .

Accesories:

LI-USB-A/B              1.8M USB A to B cable        
T-snap (Option)     DIN rail mounting adapter