All Products
JetNet-2005f-mw Industrial 5-port Compact Fast Ethernet Fiber Switch

Korenix 5-port Compact Fast Ethernet Fiber Switch

From 256,50 €
4 10/100 Base TX ports plus 1 Fast Ethernet Fiber ports
Supports Multi-mode 2KM, Single-mode 30KM
Slim-sized for Industrial Din-rail Application
18~32VDC Power Input
Relay Output for Port Alarm
Stock
3
Code
JetNet 2005f-w
Quantity
  

Korenix 5-port Compact Fast Ethernet Fiber Switch

Industrial 5-port Compact Fast Ethernet Fiber Switch

  • 4 10/100 Base TX ports plus 1 Fast Ethernet Fiber ports
  • Supports Multi-mode 2KM, Single-mode 30KM
  • Slim-sized for Industrial Din-rail Application
  • 18~32VDC Power Input
  • Relay Output for Port Alarm
  • Supports AC 1.5KV Hi-pot isolation protection
  • IP31 rugged aluminum case
  • Operating temperature -10~60°C (-40~75°C wide temperature mode available by request)
  • Class1 Division2 certificate for hazardous locations

 

Korenix JetNet 2005f is an Industrial with 4 ports 10/100Base-TX and one 100Base-FX Fast Ethernet switch. With the fiber uplink function, it enlarges the transmission distance to 2KM by multi-mode fiber (JetNet 2005f-m) or 30KM by single-mode fiber (JetNet 2005f-s). The JetNet 2005f adopts slim and rigid aluminum case to save rail space and provides good heat radiation ability for compact system requirement. In order to be operated in harsh environment, JetNet 2005f is equipped with IP31 grade case design to meet the requirements of drop-water and dust proof. The JetNet 2005f also provides one relay output for port error events, which is enabled/ disabled by the DIP switch. Moreover, JetNet 2005f has good immunity against unstable power source and can accept DC 18~32V power input by terminal block.

Plug-and-Play Switch & High-Speed Transmission
JetNet 2005f series requires no user setup and immediately starts operating as soon as you power it up. Excellent data transmission performance is provided for you. No traffic will be delayed with the transmission rate up to 3.2Gbps.

Compact Size & Fault Relay Output
The slim-sized design makes it an ideal model that would physically fit in a network environment with limited space. One relay output is an important feature to let you know when there is any event of port link down. Just move up the DIP switch, the fault relay alarm will be functioning!

Fiber Optic Port Options for Long Distance Requirement
To avoid interference as well as to extend your network coverage, in addition to 4 Fast Ethernet copper ports, JetNet 2005f is equipped with one 100Mbps fiber uplink port. The fiber ports supports multi-mode fiber for 2KM or single-mode for 30KM distances, in order to achieve stable far-end transmission.

Easy Installation & Brilliant Idea for Hazardous Environment Application
JetNet 2005f series can be easily wall mounted and mounted directly on DIN rail. The IP31 rigid aluminum flat casing and wide operating temperature range ensure reliable operation in harsh environments. Extended operating temperature range is available for project-based request.

JetNet 2005f Application

Dimensions (unit=mm)


 

Technology
Standard

IEEE802.3 10Base-T
IEEE802.3u 100Base-TX
IEEE802.3u 100Base-FX
IEEE802.3x flow control

Switch Technology

Store and forward technology and with 3.2Gbps switch fabric

Aggregate System Throughput

1.49Mpps

Interface
Number of Ports

4 x 10/100 Base-TX with Auto MDI/MDI-X, Auto-Negotiation function
1 x 100Base-FX supports multi-mode or single mode fiber

Connectors

10/100 Base-TX: RJ-45
100Base-FX: Duplex SC
Power/Relay: 4-pin terminal block

Cables

RJ-45 connector: supports Cat.3, Cat.4, Cat.5 unshielded twisted pair or shielded twisted pair cable.The link distance is maximum 100 meters.
Fiber: SC, multi-mode or single-mode
Multi-mode fiber: 50/125um or 62.5/125um, max. distance 2KM
Single-mode fiber: 8/125um, 9/125um or 10/125 um, max. distance 30KM

Fiber Transceiver

JetNet 2005f-m, multi-mode fiber
Link Distance: 2KM (Max.)
Wave-length: 1310nm
Min Tx Power:-20dBm
Max Tx Power:-14dBm
Min Rx Sensitivity:0dBm
Max Rx Sensitivity:-31dBm
Link budget:11dBm
JetNet 2005f-s, single-mode fiber
Link Distance: 30KM (Max.)
Wave-length:1310nm
Min Tx Power:-15dBm
Max Tx Power:-8dBm
Min Rx Sensitivity:0dBm
Max Rx Sensitivity:-34dBm
Link budget:19dBm

Port Alarm DIP Switch

DIP 1~5: Port Event Alarm Control
On: Enable port link down alarm.
Off: Disable port link down alarm.

Diagnostic LED

System: Power (green), Fault (red on)
RJ-45 port: 100Mbps Link (green on)/Activity(green flashing)
10Mbps Link (yellow on)/Activity(yellow flashing)

Power Requirements
System Power

DC 18~32V with reverse polarity protection

Power Consumption

4 Watts @ DC 24V

Mechanical
Installation

DIN-Rail mount

Casing

Aluminum case with IP31 protection

Dimensions

111.8mm(H) x 30mm (W) x 98.2mm (D) (with DIN rail clip)
111.8mm(H) x 30mm (W) x 89.4mm (D) (without DIN rail clip)

Weight

377g with package
295g without package

Environmental
Operating Temperature

-10~ 60°C (JetNet 2005f)
-40~ 75°C (JetNet 2005f-w)

Operating Humidity

0% to 95% (Non-condensing)

Storage Temperature

-40 to 85°C

Hi-Pot

1.5KV for all ports and power

Regulatory Approvals
EMI

FCC Class A, CE/EN55022

EMC Immunity Interface

IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-6, IEC 61000-4-8

Safety

UL 508

Shock

IEC60068-2-27

Free Fall

IEC60068-2-32

Vibration

IEC60068-2-6

MTBF

713,506 Hours, MIL-HDBK-217F GB standard

Warranty

5 years

Product Documentation

JetNet-2005f-mw
JetNet-2005f-mw Datasheet
Download